1.5″ Telescoping Upright

We are the only company that makes a 1.5″ diam. telescoping upright.  This upright is part of the Slip Fit System and works by sliding the Upright directly over the pin on the Slip Fit Base.  We recommend this telescoping upright for companies looking to transition from Fixed Height Uprights to telescoping because you can typically utilized your existing Base and may only need to add a Base Weight or Saddle Bag depending on how high you are going.

Our Telescoping Slip Fit Uprights come in three sizes ranging from 3′ to 14′ H. The two-in-one system: Button Lock System and the Locking Clamp Systems provide flexibility to use the same upright for different heights. The Button Lock System has a button lock that slides up and down the pipe in marked one-foot increments and then locks into place. This option is great if you know your Pipe and Drape set up will always be adjusted in one-foot increments. The Locking Clamp System is also great – it allows you to adjust your Upright in-between one-foot increments.

For example, you can set your Upright to eight and a half feet which really gives you a nice range of flexibility. Instructions on how to use the locking clamp ship with the order. The Locking Clamp will ship pre-assembled on the upright.

The Slip-Fit System is recommended if you are looking for a quick set up and take down time. These Uprights come standard in an aluminum finish, but Black and other Powder Coated finishes are available as an upgrade.

Now you can also get your uprights the way you want them: Choose the traditional silver look, black anodized, black powder-coated, or add a CastleTop® insert.

The Georgia Expo Difference

• Cut, punched and finished in our factory, these uprights go through a series of operations on our punch presses to give you exact heights and drape support slots, this also means we can customize your uprights to fit your unique event needs, ask your sales representative for details on customization
• Anodized Aluminum
• 4 slots every 90° at the top of the Upright
• 0.050 wall thickness
• This is the only 1.5″ diam. telescoping upright available in the industry
• Solid Steel button stops
• CastleTop® is a PATENTED product: United States Patent, Patent No. US 10,941,560 B2 | March 9, 2021

3′-5′ Upright pairs with  16″ x 14″ Slip Fit Base

6′-10′ Upright pairs with 16″ x 14″ Slip Fit Base or 18″ x 18″ Slip Fit Base

7′-12′ Upright pairs with 18″ x 18″ Slip Fit Base

8′-14′ Upright pairs with 18″ x 18″ Slip Fit Base

*You can also use your existing base plate and pin, for heights over 8′ add a Base Weight or Saddle Bag for additional stability and weight.

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov
Disclaimer: Pipe and Drape should never be used where tip-over could cause harm or damage.