Slip-Fit Base 15″ x 15″

This base plate pairs with the most common 8′ Upright.  15″ x 15″ Bases are designed to pair with fixed height or telescoping  Uprights up to 8′ high. These bases feature a stacking slot and are available with 1.5″ or 2″ diam. x 3″ or 6″ high pin sizes.  The taller you go with your Upright, the heavier the Base you need; check out our other Bases for uprights over 8′, or for even greater stability, you can also add a Base Weight or Saddle Bag for increased support on your base.

The Georgia Expo Difference

• Punched and finished in our factory, these bases go through a series of operations on our punch presses to give you the features below; this also means we can customize your bases to fit your unique event needs; ask your sales representative for details on customization.
• Three holes for pin placement down the middle so the pin can be positioned in the middle or off to the side when setting up against a wall or corner.
• A stacking slot allows you to keep your pin installed while stagger-stacking your bases for more compact storage and transportation.
• Lightweight, hollow pins

15″ x 15″ bases pair with uprights up to 8′ H (10lbs) *recommend 3″ pin (0.5lbs)

When picking your pin size, match up the first dimensions with the diameter of your Slip-Fit Uprights. We sell both 1.5″ and 2″ diam. uprights. The height of the pin increases stability. For reference, our standard 8′ upright pairs with our 16″ x 14″ base with a 1.5″ x 3″ pin. If you have any questions on picking out which base you need with your upright we are happy to help! 1.800.433.9767

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information: www.P65Warnings.ca.gov
Disclaimer: Pipe and Drape should never be used where tip-over could cause harm or damage.